Certified Indoor Playground Equipment — ASTM, EN 1176 & TÜV Tested

    Every NINESCAPELAND indoor playground system is tested by independent third-party laboratories and manufactured inside ISO-certified factory systems. Certification documents, test reports and declarations of conformity are available for your authority, landlord, insurer or investor.

    Request Certification Pack WhatsApp Us
    CE TÜV ASTM F1918 / F1487 EN 1176 & 1177 ISO 9001 : 2015 IAAPA Member

    Product Certification for Indoor Playground Equipment

    Our indoor playground structures, trampoline systems and soft play modules are assessed against the safety requirements of the destination market. The certificates below cover CE conformity, TÜV testing for play structures and rides, VC certification and GTS reports.

    CE CE certificate for indoor playground equipment - NINESCAPELAND

    CE Declaration of Conformity

    EU conformity assessment for commercial indoor playground equipment. Required for import and installation in EU member states.

    EU Market · Full copy on request
    TÜV TUV test report for indoor playground equipment

    TÜV Test Report — Play Structures

    Independent TÜV testing of indoor play structures covering structural strength, entrapment and fall protection.

    Test Report · Structure & Safety
    TÜV Rides TUV certified rides and play structures test report

    TÜV Rides Certification

    TÜV assessment for mechanical ride attractions including climbing towers, zip lines and vertical slides.

    Ride Attractions · TÜV Report
    VC VC certification for commercial playground equipment

    VC Certification

    Third-party VC certification confirming product conformity for commercial playground installations.

    Product Conformity

    Safety Test Reports for Play Equipment

    Beyond certificates, full test reports document how each product was evaluated — load capacity, impact attenuation, material composition and structural integrity. Reports are issued page by page and can be submitted directly with your building permit application.

    GTS GTS third party test report for indoor playground structures

    GTS Report — Play Structures

    Third-party laboratory report for indoor playground structures, referenced in permit submissions.

    Test Report · Structures
    GTS GTS safety test report for soft play equipment

    GTS Report — Soft Play Modules

    Safety test report covering soft play structures, foam elements and padded platforms.

    Test Report · Soft Play
    EMS EMS test report for playground equipment materials

    EMS Report — Material Testing

    Material-level test report covering component durability and finished surface performance.

    Test Report · Materials

    Playground Safety Standards We Follow

    Different markets use different frameworks. We design and manufacture to the standard that applies to your project — European EN series, US ASTM series, or both when your investors and insurers require dual compliance.

    EN 1176 European standard for playground equipment and surfacing. Covers structural integrity, entrapment, fall height and installation requirements.
    EN 1177 Impact-attenuating playground surfacing. Applied to foam pits, padded flooring and landing zones across our play systems.
    ASTM F1487 US standard for public playground equipment. Widely referenced by US and Canadian authorities during site inspection.
    ASTM F1918 US standard specific to soft contained play equipment — the primary reference for indoor playgrounds in North America.
    ASTM F2970 US standard for trampoline courts. Applied to our commercial trampoline park projects and required by many US insurers.
    EN ISO 23659 Standard for trampoline parks and trampoline equipment. Used for European trampoline park projects.

    EN 1176 vs ASTM F1487: Which Applies to Your Market?

    Buyers frequently ask whether EN 1176 or ASTM compliance is required. The answer depends on where the venue is built — not on the equipment itself. The table below shows how the two frameworks map onto a typical indoor playground project.

    Project FactorEN 1176 FrameworkASTM Framework
    Primary marketEurope, Middle East, Africa, Asia-PacificUnited States, Canada
    Core standardEN 1176 (equipment), EN 1177 (surfacing)ASTM F1487 (public), ASTM F1918 (indoor soft contained)
    Trampoline projectsEN ISO 23659ASTM F2970
    Typical verifierNotified body or TÜV testingThird-party lab report reviewed by local authority
    What we supplyEN 1176 test report, CE declaration, TÜV reportASTM F1487 / F1918 / F2970 test reports
    Not sure which applies? Ask our compliance team →

    Fire-Retardant Material Compliance

    Indoor play venues are subject to local fire codes that frequently exceed general product standards. Our soft play materials, padded panels and textile elements are tested to recognised fire performance standards so your venue can pass inspection without replacing components after installation. For buyers sourcing fire rated soft play equipment, the full material certificate for each module is included in the project documentation pack.

    EN 13501-1 European fire classification of construction products. Applied to padded panels and wall systems.
    NFPA 701 US standard for flame propagation of textiles and films. Applied to fabrics, nets and soft covers.
    UL 94 Flammability rating for plastic materials. Applied to moulded play components and enclosures.
    ASTM E1354 Heat and visible smoke release rate testing. Used for material selection on higher-risk attractions.

    ISO Certified Factory Management Systems

    Product testing only covers the sample submitted. Factory management certification covers every unit produced afterwards — which is why serious buyers ask for both. As an ISO certified playground manufacturer, our 50,000㎡ facility in Wenzhou operates under three certified management systems, audited annually.

    Quality GB/T 19001 ISO 9001 quality management certificate - playground factory

    ISO 9001 / GB/T 19001

    Quality management system certification covering design, production and inspection processes.

    Quality Management
    Environment GB/T 24001 ISO 14001 environmental management certificate

    ISO 14001 / GB/T 24001

    Environmental management system certification for manufacturing operations and waste handling.

    Environmental Management
    Safety ISO 45001 occupational health and safety certificate - playground manufacturer

    ISO 45001

    Occupational health and safety management system certification for production facilities.

    Occupational Health & Safety

    Certificate Documents for Your Project

    Compliance paperwork is usually requested by someone other than the buyer — a building department, a mall landlord, an insurance underwriter or an investor doing due diligence. We prepare the document set for each audience.

    1
    For local authorities & building departments Test reports referenced to the applicable EN or ASTM standard, declaration of conformity and installation drawings.
    2
    For mall owners & landlords Fire-retardant material certificates, structural loading summary and insurance-ready compliance statement.
    3
    For insurance underwriters Certificate pack covering equipment certification, maintenance schedule and warranty terms.
    4
    For investors & due diligence Factory ISO certificates, third-party test reports and project reference list.
    5
    Verification Every certificate carries an issuing body and certificate number that can be verified with the issuing organisation directly.

    Certification Questions, Answered

    The questions buyers ask most often before signing.

    What certifications do your indoor playgrounds have?
    Our indoor playground equipment is covered by CE conformity, TÜV test reports for play structures and rides, VC certification and GTS third-party test reports. Factory systems are certified to ISO 9001, ISO 14001 and ISO 45001. The exact certificate set depends on the product line and destination market — request the pack for your project and we will send the matching documents.
    Do you have EN 1176 certificates?
    Yes. EN 1176 and EN 1177 test reports are available for our European projects, together with CE declarations of conformity. EN 1176 covers playground equipment and EN 1177 covers impact-attenuating surfacing such as foam pits and padded flooring. Both documents are commonly requested by EU authorities during installation approval.
    Do you have ASTM F2970 certificates for trampoline parks?
    Yes. ASTM F2970 test reports are available for commercial trampoline park projects in the United States and Canada, alongside ASTM F1487 and ASTM F1918 reports for playground and soft contained play equipment. For European trampoline projects we supply EN ISO 23659 documentation instead.
    Can you provide CE and TÜV certificates?
    Yes, both. CE declarations of conformity are issued for EU market projects, and TÜV test reports are available for play structures and mechanical ride attractions. Every document lists the issuing organisation and certificate number so your authority or insurer can verify it directly.
    Are your materials fire-retardant?
    Our soft play materials, padded panels and textile elements are tested to EN 13501-1, NFPA 701, UL 94 and ASTM E1354 as required by the destination market. Fire performance certificates are supplied as part of the project documentation package, which is typically what mall landlords and insurers ask for.
    Can you provide certificates for local approval?
    Yes. We routinely prepare documentation for building departments, mall landlords, insurance underwriters and investors. Send us the specific standards or checklist your authority requires and we will confirm which documents we can supply — and flag any item that needs local testing after installation.
    Ask a Compliance Question

    Equipment Covered by These Certificates

    View All Products
    Indoor playground equipment covered by ASTM F1918 and EN 1176

    Indoor Playground

    Custom soft contained play structures certified to ASTM F1918 and EN 1176.

    Explore category
    Commercial trampoline park systems with ASTM F2970 documentation

    Trampoline Parks

    Commercial trampoline systems with ASTM F2970 and EN ISO 23659 documentation.

    Explore category
    Fire retardant soft play foam pit and sponge play zone

    Soft Play Structures

    Fire-retardant soft play modules tested to EN 13501-1 and NFPA 701.

    Explore category
    Commercial indoor ninja warrior gym equipment

    Ninja & Obstacle Courses

    Indoor ninja courses engineered and tested for commercial use.

    Explore category
    Indoor spider tower climbing and free fall attraction

    Climbing & Adventure

    Climbing walls, towers and zip lines with TÜV ride certification.

    Explore category
    Custom indoor ropes course 3D design for a turnkey FEC project

    Custom Solutions

    Turnkey FEC projects designed to your local compliance requirements.

    Explore category

    Need a Certificate for Your Project?

    Send us your country, venue size and the standards your authority requires. We will reply with the matching certificates, test reports and a compliance summary for your build.

    Get a Free Quote Back to Homepage